Donnas Pool Care Posted September 26, 2017 Report Posted September 26, 2017 Spa is not heating, voltage to each element is 120v. But when I set the temp up to 104 the spa kicks on for a shot while and then shuts off. I don't hear a low speed pump circulating. What way should I go, change the 2 speed pump or replace heater? Quote
castletonia Posted September 27, 2017 Report Posted September 27, 2017 Heaters will usually trip a break when bad. Does the 2-speed pump have low speed when you press the jets button on the control panel? If so, then I doubt the pump is your issue. If not, then pump but otherwise, I would suspect the main circuit board. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.