Jump to content

Recommended Posts

We recently bought a Masterspa LSX from about 2004. The circulation pump had been completely rusted and seized, so after replacing it and fixing a few leaks, it seems to run good as new. I noticed on the control board dip switches there is a setting for the circ pump to only run when the temperature falls below 3 degrees of the setpoint. The manufactures default setting is to run 24 hours. I changed the switches according to the setting for the 3 hour temp threshold, reset the breaker, and waited, but it still runs constantly despite the temperature. Am I missing a step here? Thank you for your time.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...