ajaymccollum Posted August 7, 2017 Report Posted August 7, 2017 We recently bought a Masterspa LSX from about 2004. The circulation pump had been completely rusted and seized, so after replacing it and fixing a few leaks, it seems to run good as new. I noticed on the control board dip switches there is a setting for the circ pump to only run when the temperature falls below 3 degrees of the setpoint. The manufactures default setting is to run 24 hours. I changed the switches according to the setting for the 3 hour temp threshold, reset the breaker, and waited, but it still runs constantly despite the temperature. Am I missing a step here? Thank you for your time. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.