dmoney Posted August 7, 2016 Report Share Posted August 7, 2016 hey guys. hoping someone can lend some expertise. Had a leak fixed last year in my spa. Everything was working fine except for another leak that sprung right before winter. I drained and closed the spa until today when i put it up on blocks to be able to find the new leak. Filled it up, loosened the inlet on the pump to allow it to prime, and then started it up. When it wasn't priming in the past, the pump would go on but not do anything. I could hear it humming, but as it wasn't primed, it wasn't pushing any water. Today however it wasn't turning on. I could hear the click on the spa pack when i pushed the pump 2 button, but that's it. I tried removing and replacing the power cable on the spa pack but still nothing. Time for a new pump? TIA Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.