Btridle Posted June 22, 2016 Report Share Posted June 22, 2016 Anybody have any advice on the direction I should go? I have a Clearwater Spa that I just inherited from a cabin I bought. The third pump on the tub was badly rusted and when pushed the button to fire it up a snowflake looking icon appears on the controls. I ordered a new pump and installed it, plugging it into the same slot on the circuit board as the old pump. When I fire pump one and two they work well but the icon looks different (swirly thing). The new pump however will not fire and the icon appears to be for a blower motor (snowflake). When I look at the wiring diagram the slot I plugged the new pump into says its for an optional third pump not a blower. I also switched the new pump to one of the other pumps terminals to check if the new pump worked and it fired run up. Just looking for a little advice on where look before I call a tech. Was hoping it was something simple that I'm just not seeing. Circuit board is a BC2003. Any help is greatly appreciated. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.