gcwilso Posted May 14, 2016 Report Share Posted May 14, 2016 Cord has power but after draining and moving it has no power light and no pump action. 120v and plug lights up. Quote Link to comment Share on other sites More sharing options...
Roger Posted May 14, 2016 Report Share Posted May 14, 2016 Does the display come on? Have you checked the fuse/s inside? Quote Link to comment Share on other sites More sharing options...
gcwilso Posted May 14, 2016 Author Report Share Posted May 14, 2016 It doesn't have a display on this model and yes fuses are ok. Quote Link to comment Share on other sites More sharing options...
Peteyboy Posted May 15, 2016 Report Share Posted May 15, 2016 Is there a GFCI on the cord? If so, even if it lights up it might not be sending power to the spa. (If there is no GFCI I hope it's plugging into one or the breaker for the circuit is GFCI, Don't use the spa if there isn't one)) It's possible it's just a bad GFCI. If not you need to pull out the control box and troubleshoot further. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.