mag357 Posted April 18, 2016 Report Share Posted April 18, 2016 I havd a leak in the spa, after the pump for the pool and spa goes off the water level in the spa drops about 1 inch over night. I check and replace the valve thinking that was the problem but it isn't. A pump service guy came and used the dye detection and said it looks like it is leaking at the light. So I drained the spa into the pool and usede the pool putty where I think it could be leaking such as around the light cord inlet and everywhere else. Waited until it was dried and put water back into the spa. The following day it leaked half the previous amount about 1/4 inch bellow the water line. Is it possible to use flex seal and just spray the area and see it that takes care of the problem and will that hold. I am gettin frustrated now. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.