Jump to content

How To Repair Or Replace Hot Tub Light/housing


Recommended Posts

hi I have a 14 year old beachcomber 550x - the underwater light no longer works. I drained the tub and when removing the lens cap, found that the housing unit threads to hold the cap in place are no more (cap threads are fine) . It is also possible that the housing may have been leaking due to the thread issue, as I had a leak as well. I believe its a standard 3 1/2 or 2 1/2 housing with a 12 volt bulb driven by the balboa pack.

what are my options here? - are there any diy steps to replacing the housing - I understand I may need to get to it from underneath, but not sure....or is it possible to silicone the cap back in and eliminate any potential for leaks? thanks

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...