poolcare novice Posted August 15, 2015 Report Share Posted August 15, 2015 Hello, Our very old Anthony Pools in-ground pool had a weir door/flapper secured to the bottom skimmer housing. Nothing is left intact except one of the 2 bolts that was securing the door in the concrete. I could not find a replacement weir door that is tall enough and the spring-loaded replacement I found at the local pool supply store (which is about the right width) was very hard to install as I really didn't know exactly where to position it in the skimmer housing. Also, if I placed it too high the skimming action was less and if I lowered it it would not keep debris in the skimmer basket area when the pump shuts off. Would you have any suggestions as to how I might improve my situation? Thank you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.