kargaaro Posted June 8, 2015 Report Share Posted June 8, 2015 I have a 2004 Coast spa that worked 2 years ago but after I moving it when I power it up pump 1 starts and runs but there is no display on the topside and the buttons do nothing. I checked and I have good power at the unit, cleaned all of the connections for the transformer and topside. There is no replacement topside available from gecko, I have to replace everything, board and topside which is $$. I don't have any way to try a different topside. Fuses are good, board looks fine. Anything else I could try troubleshooting?? Would pump 1 run if the board was bad?? I'm new here, thanks for any help. Quote Link to comment Share on other sites More sharing options...
houstoncoolpools Posted June 9, 2015 Report Share Posted June 9, 2015 I'll Suggest to get help any expert of you area! To this way you can also learn that how you can resolve this issue in future. I'll also suggest you a best company of Houston which known as Houston Cool pools which are providing Swimming Pools Repair, Remodeling and Construction services. Click on the Company website Link! You may get all company information from this link. Quote Link to comment Share on other sites More sharing options...
SpaSage Posted June 9, 2015 Report Share Posted June 9, 2015 How did you learn that there is not a replacement topside available for your Coast spa? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.