Jump to content

Calspa Dualy - Low Speed Is Faulty But Works...


TMWSIY
 Share

Recommended Posts

Hello All,

I'm experiencing an odd behavior with my CalSpa 5000 w/ Dualy pump, and hoping this forum can help me troubleshoot.

Lately my spa is having trouble activating the low-speed pump. When it cycles, the motor comes on, but the pump does not. It 'hums' but the jets do not activate. When not cycling, the same behavior is observed when I hit the jet button. In both cases, the high-speed pump works fine.

The odd behavior: after hitting the high-speed pump, the low-speed works fine. It's as if the high-speed pump either improves flow / opens a gate somewhere, or it kicks the low speed pump into gear.

Based on responses in multiple forums, I disabled the suction sensors by pulling the grey wires out of the motheboard this afternoon. That did not fix the problem.

Thanks in advance for any thoughts you may have.

Chris

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...