saralees Posted May 4, 2014 Report Share Posted May 4, 2014 Hello, My tub flashes flo. It will not heat or circulate. I shut off the power for several hours to reset.I changed the filter. All three pumps work and I did the air bleed trick from the top massage valves opposite of the filter side. I also tapped on the flo valve and it seems to circulate ok when the pumps are running. Should the bleed trick be done several times? Water will not flow from within the system even with the waterfall valve open. Emergency heat will not come on even though the water temp is 30 degrees below the set temp. Also when I tap the button for pumps 2 and 3 when every pump and bubble maker is on all the pumps shut off. I am thinking circulating pump? or perhaps heater too? Are there any large fuses to check? Any suggestions will help. Thank you in advance. Sara Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.