Eric859 Posted February 10, 2014 Report Share Posted February 10, 2014 When I turn on the hot tub, this is what happens: 1) Jet 2 of 2 starts immediately and stays running 2) The circ pump turns on and off again for about 10 minutes before completely turning off 3) The display shows 3 blinking dots, but the temp is accurate 4) The tub light comes on and cannot be turned off 5) Jet 1 cannot be turned on. Any ideas? Quote Link to comment Share on other sites More sharing options...
Eric859 Posted February 10, 2014 Author Report Share Posted February 10, 2014 OK, I found the issue with the 3 blinking lights. The flow switch is faulty. LA Spas showed me that if I turn on the tub with the flow switch disconnected from the main board and then reconnect it, the issue with the circ pump goes away. It did. The problem I have now is that Pump 2 turns on as soon as the tub is powered on and can't be turned off and pump 1 is non responsive. The control panel I swapped out seems to be working fine and shows no errors. Any ideas? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.