patandwhitney Posted December 31, 2013 Report Share Posted December 31, 2013 We are newbies with hot tubs and have a new Hot Springs Grandee. Have had it for 3 months. The green "logo" light recurs on blinking errors. We have cleaned the filters (which were pristine). We check the diagnostics screen and it will first show as in the yellow. Then we turn off the tub, wait, and turn back on. Then the same screen shows all in the green. A few hours later, we have to do it all over again. Manual chemical test strips show everything where it should be. Any suggestions as to what the issue is? Quote Link to comment Share on other sites More sharing options...
PreservedSwine Posted January 2, 2014 Report Share Posted January 2, 2014 Do you have ACE? Go into the ACE menu and see which value is flashing. That's the value that will need attention... The useage value will need to be confirmed monthly, and the flashing green light is it's way of grabbing your attention. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.