mnmtwi Posted December 5, 2013 Report Share Posted December 5, 2013 I have a 2004 Hot Springs Sovereign 240v that has been working like a charm. I went out to use the tub and the heater and jets do not work. The circulation pump is running and lights work. The indicator lights on the control board are green (LNE) and Red (heat) and nothing lit for third. When I activate the pump, the light comes on (red) on the board and the indicator on the dispaly says "jets" but pump does not kick on. Heater is only a year old. Any suggestions on what it would be. My real dilemma is the temp is going to drop well below zero for the next week or so, of course!! Any suggestions? I did see a post similar to my issue a while back, it sounded like a wiring problem. Thanks, Mike Quote Link to comment Share on other sites More sharing options...
PreservedSwine Posted December 6, 2013 Report Share Posted December 6, 2013 Sounds like either the pump or board had failed... Have you checked voltage at the terminals that supply power to the pump, as well as the voltage at the main terminal block? Quote Link to comment Share on other sites More sharing options...
Hot Spring Official Posted December 11, 2013 Report Share Posted December 11, 2013 Hi mnmtwi, Give us a ring and we will work to assist and/or get you in touch with someone locally! 800-999-4688. Thanks, Steve ---Hot Spring Spas--- Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.