cbnsingramq Posted October 1, 2013 Report Share Posted October 1, 2013 I have a used hot tub I'm trying to get working correctly. Is it correct that my Marquis Euphoria, when on circulation/heat cycle, is only moving water through the pipes on one side of my hot tub? Both sides work when I turn on the pumps, and the blowers work. The right pump (160?) is pretty hot but sounds as though it is working. Also, it is my understanding that if the ozonator is working it will "glow". Should the glow be very obvious? I ask because I see no appreciable glow, in daylight at least, when in the ciruclate/heat cycle. Quote Link to comment Share on other sites More sharing options...
cbnsingramq Posted October 6, 2013 Author Report Share Posted October 6, 2013 No one? Quote Link to comment Share on other sites More sharing options...
Apollo217 Posted October 6, 2013 Report Share Posted October 6, 2013 Not so much that it will glow as there is a light on there that will be lit up when on if it's working Quote Link to comment Share on other sites More sharing options...
spatech (the unreal one) Posted October 6, 2013 Report Share Posted October 6, 2013 You should have a spa with 2 large jet pumps and no small 24/7 circ pump. Therefore, when the spa needs to heat and/or filter one of your jet pumps will turn on low speed while the other pump will stay off. As far as the ozonator goes, if it is a UV ozonator then you should see a bulb glowing. If its the original ozonator that came with the spa and is 9 years old it is doing you no good even if it does glow. Run without it for now and see how it goes, you'll be fine if you maintain you chlorine. Quote Link to comment Share on other sites More sharing options...
cbnsingramq Posted October 7, 2013 Author Report Share Posted October 7, 2013 So the pumps each handle a different side and only the one circulates while heating, so just one side moves water. Got it. Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.