ST3Andy Posted September 5, 2013 Report Share Posted September 5, 2013 Here is what happened. I drained off some rain water, put the cap back on and the rubber washer fell off. check spa 2 days later and it was drained. It all leaked out. I have tried restarting and clearing the air from system, but the circulation pump will not run. Could I have burned out pump? Everything else is fine. I pulled the filters and tried priming the pump but still no go. Thanks Quote Link to comment Share on other sites More sharing options...
Hot Spring Official Posted September 6, 2013 Report Share Posted September 6, 2013 Hi ST3Andy, Was the spa powered on with no water in it at some point then? This can do damage the circ pump/comoponents. Thanks, Steve ---Hot Spring Spas--- Quote Link to comment Share on other sites More sharing options...
spatech (the unreal one) Posted September 6, 2013 Report Share Posted September 6, 2013 Here is what happened. I drained off some rain water, put the cap back on and the rubber washer fell off. check spa 2 days later and it was drained. It all leaked out. I have tried restarting and clearing the air from system, but the circulation pump will not run. Could I have burned out pump? Everything else is fine. I pulled the filters and tried priming the pump but still no go. Thanks Did you try disconnecting the outlet of the circ pump just slightly to see if air escapes? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.