Jump to content
Sign in to follow this  

Building Inground Spa With Air Bubbles Flowing From The Floor

Recommended Posts

Hi everybody,

I am writing from Uruguay in south america, where things and materials are not too readily available.

I am currently building an inground concrete pool with a 3 x 3 yard spa attached to it. (actually lays in the pool)

One of the features I have seen in these spas during some traveling , apart from the jets, is a flow of air bubbles raising from little holes in the floor and creating a spectacular effect. (bubbles grow as the go up the water)

I did my research for air blowers in the US and will probably get and bring a 1.5 or 2.0 HP Santanna II air blower made by waterway at about 110 / 119 CFM.

What I have seen and want to do, is air to flow through individual little holes (about 3/16" in diameter) in the floor to make individual bubbles, and have about 60 to 80 of them throughout the floor , (do not want to use multi holes air injectors) but can not find the right piping or parts here to make this happen.

Would appreciate if you could advise on what to use, and where to get it in the US. I will actually be in the US next week and could try to purchase the parts and bring them with me.

Thank you in advance for your advise and support,


Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Create New...