ddamian Posted July 26, 2013 Report Share Posted July 26, 2013 We just install Intex AGP 15'x48" and we're using Intex Sandwater Filter SF15110 and Intex Saltwater System CS8110 - 3 day ago We took a water sample to a pool place and the Chlorine Level shows 0.5 according to them the Chlorine level should be 1.2 BUT the Intex Saltwater guide show that Ideal is 0.4 - 1.5 ppm The reading 0.5 has been the same for the last 2 days, we put up the pool 3 days ago.. should I add shock treatment to the pool to jump start the chorine level sine the pool place recommend 1.2 or should I leave it along for now since the current reading is 0.5 and this reading ig "Ideal" according to the Intex guide chart? NOTE: the other reading that is off is the Stabilizer = 0, we haven't added any Cyanuric Acid since the chlorine level is low. Any input will be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.