gkh Posted July 21, 2013 Report Share Posted July 21, 2013 I recently replaced my existing spa pack with a new Balboa 500z series pack, specifics here: http://www.poolsupplyworld.com/Balboa-54217-Z-Bundled-System-VS501Z-Retrofit-Kit-Complete--Lite-Duplex--Retrofit-Bezel-With-Cords-Primary-Pump-Blower-or-Secondary-Pump-Light-Ozone/54217-Z.htm? My spa has 2 pumps, one 2 speed and one 1 speed. The new spa pack is great, with one exception: I can't get the 1 speed pump to run for more than 5 minutes without cutting off for 5 minutes. It cycles on and off 5 min on, 5 min off. My controls list "blower, jets, temp, light" I have the "jets" as the 2 speed pump and "blower" as the one speed pump. Can someone please tell me how to fix this short duration cycle to a 20 or 30 minute on unless you cut it off? Thanks in advance! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.