rawalker Posted December 12, 2012 Report Share Posted December 12, 2012 My spa was working fine, then I had an electrical problem, so there was no power available for about 2 weeks. When I did get the power going again, the top LCD panel came back on and is locked and I am not able to unlock it. The dsiplay reads out 'COOL' or 'ICE' and the icon of pump 1 is on, but there is no action. Somtimes it gives the numbers of 15: 5 when trying to use the display. I have tried shutting down power for a couple of hours.. but still the same problem. I have tried emptying some water out and then running hot water in to try and warm it up, but still the same thing. Does anyone know if there Is maybe a reset button on the control box? How would I know if it needed a new fuse? Not sure what to do as it is winter... and if I cant figure this out I will be emptying it out this weekend to shut down for the winter. So any help/suggestions would be greatly appreciated. Link to comment Share on other sites More sharing options...
waterbear Posted December 13, 2012 Report Share Posted December 13, 2012 Duplicate thread. This one has been locked to keep answers all in one place. Link to comment Share on other sites More sharing options...
Recommended Posts