spartan Posted December 10, 2012 Report Share Posted December 10, 2012 Hi, I have a 5 seat spa that is about 5 years old. The section with 4 jets not working is part of a 3 seat section of jets that is run by one pump (1 speed, on/off button) , and the 3 seats contain about 20 jets of various sizes, 16 of the 20 jets are working as normal. In the last few weeks the 4 neck jets on 1 seat in the corner have stopped working (the other 2 seats in this section do not have neck jets). The only thing that may of happened I can think of to cause this is that the water line have dropped below the 4 neck jets due to evaporation as its hot in Australia currently and I did recently top up the water level a bit. There are no specific controls on this spa for the neck jets so I am thinking it may be a fuse or something but didn't want to open any electrics up as yet as i am no electrician. If anyone can assist to help me trouble shoot this, it would be most appreciated as I don't want to get a technician out for something that i may be able to fix myself. I do have a spa isolator switch so its easy to isolate the spa from the main power supply. The controller in the spa is a brand Spa-quip Model SP1200. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.