jdavis Posted September 4, 2012 Report Share Posted September 4, 2012 94 Hot springs Soverign with 1 jet that does not work (no flow coming out of it). It is the larger fixed jet that is on the back left when facing the controls. Would appreciate any advise on taking jet out and checking for blockage or additional troubleshooting ideas. The rest of the jets have excellent flow. Thanks for your help. Quote Link to comment Share on other sites More sharing options...
PreservedSwine Posted September 5, 2012 Report Share Posted September 5, 2012 The 94 Jet selector system is weird. The large Jet divirter on the top is only 1/2 of the equation. It has 2 positions. One position (either left or right- don't recall) is "standard). The other position the uses the large jetstrewam jet as the divirter (YOU MUST STICK YOUR HAND UNDERWATER TO ROTATE THE BEZEL) The jet-stream jet bezel has three positions, left, right, and center. It will not spin in a complete 360. It's very normal for this to get stuck over time, and leave one or more jets off. There's a little butterfly assymbly that needs replacement, and a particular jet wrench to remove it- don't attempt without the specific wrench. Quote Link to comment Share on other sites More sharing options...
jdavis Posted September 5, 2012 Author Report Share Posted September 5, 2012 Thank you for your reply. I have looked up the parts and see what you are talking about. How do I get the bezel off, does it pull off or unscrew? Thanks. Quote Link to comment Share on other sites More sharing options...
PreservedSwine Posted September 5, 2012 Report Share Posted September 5, 2012 Thank you for your reply. I have looked up the parts and see what you are talking about. How do I get the bezel off, does it pull off or unscrew? Thanks. The jetsream jet and bezel just pops off- you don't need to remove the eyeball from the bezel. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.