AJboy123 Posted June 3, 2012 Report Posted June 3, 2012 Hi all, im new to the forum. I recently purchased a Vita Spa Vintage hot tub with a heat problem. I believe the element is bad but not to sure. After removing it I did an ohms reading and got .17 ohms. I checked Spa Depots website before I found this forum and they said most elements range from 9-12 ohms if they are good, and some can go up to 25 ohms. So far the high limit and thermostat tested good so im leaning towards the element. Its a 240v and from what the element cover says is 6000 watts. Any help would greatly be appreciated! Also is there any way to test the thermocouple? From what I can see i has 1 wire going directly to the high limit. Quote
Dr. Spa Posted June 3, 2012 Report Posted June 3, 2012 Thermocouples are used on gas appliances. They sit in the pilot light and generate a small amount of electricity when heated and power the gas valve. When the spa is operating and calling for heat, is there the proper electricity going to the heater?....please fully explain how you've tested for this. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.