matt_s Posted May 25, 2012 Report Share Posted May 25, 2012 I have an Artesian Pacific Dunes with a circulation pump and propure ozon and Nature2. I want the circ.pump to run 24h. According to the manual it has two filter cycles and with a circulation pump it is default set to 24hr. Does that mean I should set it to 12h on filter cycle 1 and 12h on filter cycle 2? Quote Link to comment Share on other sites More sharing options...
countspacula Posted May 26, 2012 Report Share Posted May 26, 2012 no, filter cycle 1 is 24 hr mode, 2 is the settable mode Quote Link to comment Share on other sites More sharing options...
matt_s Posted May 26, 2012 Author Report Share Posted May 26, 2012 ok, so I set filter cycle 1 to 24hr and filter cycle 2 to 3 hours for example? But what happens then with Economy mode..this uses the heater only during filter cycles but that mode is then useless if one of them is set to 24h? Quote Link to comment Share on other sites More sharing options...
countspacula Posted May 26, 2012 Report Share Posted May 26, 2012 if you filter continuously, econ will basically act just like standard mode, maintaining your temp setting. if you set one mode to 24 hr continuous filtration, then the other mode is not used and doesnt matter what you set it at. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.