Jump to content

Snapped Air Jet


Recommended Posts

Hey Guys,

I'm a total noob here and know very little about spas. First post infact. I just relocated my old spa and have some how damaged one of the air/blower lines when I lowered it into the deck. Its where the hose connects to the jet has snapped off.

It's a Jadan Spa early 2000's from memory.

Apologies for the dodgy photo.

http://i237.photobuc...e/Spadamage.jpg

Can I glue it back on? If so what adhesive do you recommend?

Any help would be greatly appreciated.

Cheers

Link to comment
Share on other sites

i cut the lines from it, remove the old. then i silicone the male part and stick it through the hole and actually screw the body part on from underneath, then plumb back to it. I work alone is why i do it this way, if you have a helper, then turning either will get the same result. dont screw too tightly! and give your sealants plenty of drying time (24 hrs at the least, no matter what the bottle says!!)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...