Superfly1 Posted April 16, 2012 Report Share Posted April 16, 2012 New to spas, I have an Aquatic Industries tub with the Hercules control, when running it on the timer, the pump will shut down but the heater continues to run, is this normal to have the heater run with out the pump circulating water? I have run the spa up to temp and the heater does shut off, just concerend about leaving it run with no circulation? I have verified the pump is shutting off, not on low speed. Aquatic Model 7070-L Serial 1096043 Quote Link to comment Share on other sites More sharing options...
Dr. Spa Posted April 16, 2012 Report Share Posted April 16, 2012 There's probably a problem with the pressure/flow switch...The heater should NOT run without the pump running. Quote Link to comment Share on other sites More sharing options...
Superfly1 Posted April 18, 2012 Author Report Share Posted April 18, 2012 PSI switch adjusted too high, problem solved, thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.