Roger Posted February 11, 2013 Report Share Posted February 11, 2013 Looks like the pump is actually ok other than the shaft seal. Unfortunately it ran so long with the seal leaking that the water got into the motor and probably ruined the bearings. Might end up replacing the whole pump/motor unit for about 260.00 The motor is more by itself...go figure. If anyone knows if there is a rebuild kit for the motor in this url I'd appreciate the info. Thanks http://www.spapumpsandmore.com/2_speed_230v_56FR_12_0A_1110014_Spa_Pump_Motor_p/1110014.htm Not sure how the pump could of survived when you said you ran it dry??? That won't be covered under warranty. Or you could be deceitful and say it just quit. Higher prices here we come. Quote Link to comment Share on other sites More sharing options...
arf1410 Posted February 12, 2013 Report Share Posted February 12, 2013 if the pump failure was caused by another warranteed problem, I would certainly expect it be fixed under warranty, and I doubt Strong could (or would) object. That said, the nice thing about doing business with a company like Costco, is they will support you if a manufacturer refuses too. I bought a piece of electronics at Costco and after 4 years, needed to get a part from manufacturer. The manufacturer was "belly up" and when I called costco for help, they told me to bring it back to the store for a full refund. Now regarding Strong, when I called then regarding a ripped "pillow", which was clearly and specifically excluded from the warranty, they sent me a new one for free, so unless you've actually talked to them about this problem, I would assume the best regarding warranty coverage, rather than the worst! Quote Link to comment Share on other sites More sharing options...
Roger Posted February 12, 2013 Report Share Posted February 12, 2013 That said, the nice thing about doing business with a company like Costco, Besides all the Asian made products. Quote Link to comment Share on other sites More sharing options...
crookdbill Posted February 13, 2013 Report Share Posted February 13, 2013 yeah in 2009 the warranty was only 2 years on pumps and leakage. Thank you for the suggestion though. Found a pump/motor replacement for 227 plus tax at pss. Better than dealing with pulling the tub out and dragging it back to Costco. Quote Link to comment Share on other sites More sharing options...
Roger Posted February 13, 2013 Report Share Posted February 13, 2013 yeah in 2009 the warranty was only 2 years on pumps and leakage. Thank you for the suggestion though. Found a pump/motor replacement for 227 plus tax at pss. Better than dealing with pulling the tub out and dragging it back to Costco. Like I said you had a good run. Ya got almost 5 years out of the pump. Generally a value tub will have these types of problems after 5-6 years. Some of the better value tubs will make it longer. Things like the heater, pumps and controls will be first. As the plumbing and parts get brittle you may need to replace the entire tub over the next few years when it becomes not cost effective to repair. They change the tubs so often that you may want a new one anyway. It you went the quality high end tub route for twice the money you would be stuck with it for 15-20 years. Quote Link to comment Share on other sites More sharing options...
crookdbill Posted February 14, 2013 Report Share Posted February 14, 2013 back up and running. new motor is really quiet. Not a bad bill for a new pump/motor bill. Quote Link to comment Share on other sites More sharing options...
arf1410 Posted February 15, 2013 Report Share Posted February 15, 2013 how easy was it to physically do the repair? Access? Standard size fittings ? Quote Link to comment Share on other sites More sharing options...
Roger Posted February 15, 2013 Report Share Posted February 15, 2013 how easy was it to physically do the repair? Access? Standard size fittings ? Pumps are very easy. Make sure you put a little Majilube on the fittings. Or any silicon based lubricant. Quote Link to comment Share on other sites More sharing options...
crookdbill Posted February 15, 2013 Report Share Posted February 15, 2013 how easy was it to physically do the repair? Access? Standard size fittings ? It was really easy as roger said. I however I seperated the pump and the motor initially and took the pump apart. I was hoping I could salvage the motor but it was already ruined. The impeller was pretty dificult to remove but I was able to use a couple of oil filter wrenches to remove it at the end. Even so, with the motor bad I just bought a whole new motor/pump unit and put it in. The new motor does not come with a new power cord so make sure you keep the old one and take a photo of the wiring order on the motor and on the balboa panel. All in all, less than an hour job to remove the old and replace with the new without tinkering around with the old one like I did. In regards to your other questions access is wide open but you might need a wobble extension to be able to get the nuts that hold the motor down off. The fittings were exactly the same since I used the exact same pump/motor assembly. Thanks Roger. I will remove the fittings and do that. Quote Link to comment Share on other sites More sharing options...
Spa_Guru Posted February 26, 2013 Report Share Posted February 26, 2013 The seals in your pump likely degraded from chemical exposure, standard seals don't have much of a life span in this scenario, much better if the seals were Viton. You get what you pay for. Quote Link to comment Share on other sites More sharing options...
DK117 Posted November 6, 2013 Author Report Share Posted November 6, 2013 hmm, my 2012 update post deleted, but I'll give my one and only 2013 post a try. I almost forgot about this site and it took me two days to remember my password. Anyway a few weeks ago I passed 4 years, no issues. I don't use my tub as much as when it first arrived, but it's still running like a champ. See you next year. DK117 Quote Link to comment Share on other sites More sharing options...
Roger Posted November 6, 2013 Report Share Posted November 6, 2013 Please continue to keep us posted. As much as you and some others seem to think some of us are against value type tubs. Your wrong, we have said all along. They are a less expensive option to a higher priced, better designed, better built, longer lasting more energy efficient tub from manufacturer with a long standing reputation of quality and customer support. Some of us survive on value type of tubs. Quote Link to comment Share on other sites More sharing options...
hot_water Posted November 13, 2013 Report Share Posted November 13, 2013 I got my CSXi80 more or less at the same time DK got his. Similar to his report, mine is still working great, no problems in 4 years. Quote Link to comment Share on other sites More sharing options...
DK117 Posted October 31, 2014 Author Report Share Posted October 31, 2014 I almost missed my year 5 update. In short all is well. I purchased a new cover this year. I'd like to get new headrests but mostly for cosmetic reasons. One of my rotating jets seems to have gone bad, but that was free from Chad at Strong years ago. I don't think I've opened the cabinet this year. Not much to report. I'm enjoying my tub a lot less frequently than year 1 and 2. I'll have to look around for the new chemicals brand name, but I stopped using Dichlor then bleach and while more expensive I am now maybe once a week with messing with it. While absolutely of no statistical relevance, I'm 5 years in with no problems on my Strong from Costco. Still happy with my purchase. Looks like the current version of my spa, while not a perfect match is either $1500 to $2000 more at Costco today. Maybe I got what I paid for, maybe I got a good deal as Strong (evolution) entered the market with Costco. Enjoy your tubs! DK117 Quote Link to comment Share on other sites More sharing options...
hot_water Posted December 7, 2014 Report Share Posted December 7, 2014 I bought mine at about the same time that DK got his. Still have the tub, still haven't had any problems. I've been on Bromine the whole time. I haven't gotten a new cover yet, but need to soon. I'm still very happy with the tub. The cabinet hasn't shown any degradation at all - a far cry from wood panel cabinets. The proof of the pudding is in the eating, and I've enjoyed the spa - and the $4000 I saved - for 5 years now. Quote Link to comment Share on other sites More sharing options...
Roger Posted December 7, 2014 Report Share Posted December 7, 2014 Saved 4000 over what? There's value tubs out there selling for 4000 more? Now that would be a crappy deal. If your going to spend 4000 more please get a more powerful, more comfortable longer lasting tub. Quote Link to comment Share on other sites More sharing options...
DK117 Posted September 16, 2016 Author Report Share Posted September 16, 2016 Hello Gentlemen, it's been a while. I finally asked the webmaster to reset my password so I could grace you all with an annual update. I've been pretty lazy with my water chemistry resulting in a seized pump needing to be rebuilt last year. My EZ coverlifter rusted in half. Overall my 2009 "Costco" tub is running like a champ. I've never had a problem with it. There was a lot of bravado on this site in 2009 about the junk coming from Costco. Does one tub refute those opinions? Of course not. Were those opinions dead wrong in my case? Yes. Happy Tubbing. DK117 Quote Link to comment Share on other sites More sharing options...
Man Posted May 27, 2018 Report Share Posted May 27, 2018 I see you have a cover lift for your spa. Where did you get it and are you happy with it? I also need a replacement cover. Do you have any recommendations? Quote Link to comment Share on other sites More sharing options...
emt1581 Posted July 10, 2018 Report Share Posted July 10, 2018 Wanted to come back to this topic. It has caused me to rethink the purchase of a hot tub made by Strong Spa. I'm looking at an Essential Arbor 20 which is an economic/entry level hot tub made by Strong Spa, marketed through Amazon. But after a few years have passed, are the points about construction still valid as it pertains to Strong or have improvements/changes been made in recent years? Thanks! Quote Link to comment Share on other sites More sharing options...
hot_water Posted May 19, 2019 Report Share Posted May 19, 2019 I haven't been here in a very long time. I have a Strong Csxi80 - bought at Costco in 2009. 10 years now. Costco spas were quite a topic of debate back ten years ago. Here's my update: After 10 years, the pump seized up. Since it was ten years old, I bought a replacement pump - a Waterway "Executive 56" 4Hp (12 amp/4.4 amp). This is exactly what was in there to start with. Considering the amount of hours on the thing, I think it did real well. Online price, $275 with another $5 for new seals for the unions. The heater was working fine after 10 years, but since I was in there anyway I replaced it with, again, an exact replacement - Balboa M7 5.5kW. I'll rebuild the old pump and heater and keep them at the ready as spares. Which I may need.... in another 10 years. The motor is probably fine - most likely only needs new bearings. We'll see. Waterway still makes the same wet end pump. It's not expensive... but they also sell all the parts. So the wet end will be cheap. An element for the heater is $25 at Spa Depot. A titanium one is $15 more, but considering that the original went 10 years, I'll buy lunch with that $15 instead. The shell looks perfect. No blisters, no hairline cracks, no stains. The Balboa controller (VS-511) still works fine. The cabinet of this model is a plastic molded type that is, IIRC, some flavor of polyethylene. It still looks (no exaggeration) just like new. I do *nothing* to it except hit it with the pressure washer for maybe 1 minute total, once a year. No protectant, nothing. It's the best part of the spa, as far as I'm concerned - considering the way some 10 year old wood cabinets and frames look on spas my friends have. Interestingly, Strong mounted the pump and controller on a piece of Trex (or the like) synthetic deck board, instead of wood. So that hasn't deteriorated at all, either. Wood is cheaper than Trex, and since it's inside, no one would notice. But they used the synthetic, which says something about Strong... or at least about them 10 years ago. This spa was less than $5000, delivered. I don't know what that money can buy you today, but from what I see when the various "road shows" go to Costco, the prices are a lot higher than that for anything comparable. I'm an engineer, and I bought this because it had the Balboa spa pack, the 56 frame Waterway pump, and the synthetic cabinet. I figured good components would be reliable. They have been... and the design makes the thing very easy to work on. The question marks were on the reliability of the plumbing and how well the shell would hold up. There haven't been any problems with either of those. The Csxi is not the most deluxe spa out there. Some of the high end brands are stunning. But the Csxi80 continues to provide great bang for the buck. Quote Link to comment Share on other sites More sharing options...
mirassou Posted June 29, 2019 Report Share Posted June 29, 2019 I have had a Strong spa since May 2011, purchased from Costco. It's a great unit with an original price of 6100 including tax. Last year, both motors died, one in the spring, the other in the fall. They were fairly easy to replace. Those have been the only repair/replacements that I've had to do on the spa. The jets are great but not as powerful as my previous Calspa. I had the Calspa for 10 years before we sold the house, and had to replace both motors on that spa, as well as the heater pack. That price was 4500 but in the year 2000. We've gone through several covers, but that's another story...covers only seem to last several years. We use our spa every morning. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.