Jump to content

Check Valve


mag357
 Share

Recommended Posts

In ground pool about 3 years old, with elevated spa. Jandy system, pool is 7x15 irregular shape 14,500 gallons and spa 750 gallons. A few days ago I noticed after pump turning off, a few a couple of hours the water in the tub started going down I first thought it was a leak but then noticed the water in the pool rising. A friend told me to check the check valve I did and noticed the plastic flap dangling in the window with the spring broken. Is this difficult to fix and if not, what are the steps in fixing it? Any help I will greatly appreciate.

Link to comment
Share on other sites

Assuming they used a Jandy check valve, the easiest is to get another. Then remove the 8 screws on each and swap the top halves. Tighten the screw back up and yer dun dun dun!

Scott

Link to comment
Share on other sites

Assuming they used a Jandy check valve, the easiest is to get another. Then remove the 8 screws on each and swap the top halves. Tighten the screw back up and yer dun dun dun!

Scott

Thanks for the quick reply PoolGuy. Yes it's all Jandy, to include the valve. I think I will make a go at it. First time for everything.

Thanks again for the reply.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...