Guest Julie Posted September 26, 2005 Report Share Posted September 26, 2005 Hello all, We are installing a 24 ft round above ground pool, after digging our 26 ft level circle we found out our yard was not as level as we hoped. Our pool will sit down in the ground 12 " on one side. What would be the best thing to put in that left over space between the outside pool wall and the wall of the hole we have dug?? We live in Oregon so we have alot of moisture. Thanks for your help. Quote Link to comment Share on other sites More sharing options...
Guest Mgpoolsupply.com Posted September 26, 2005 Report Share Posted September 26, 2005 Hello, I assume you will be back filling up to the pool upon completion. When we installed above grounds in the ground we would use a rubberized under coating that can be picked up at automotive stores. This will keep any moisture away from the pool, and protect it from rusting. Sincerely Mike Goglia www.mgpoolsupply.com mike.goglia@mgpoolsupply.com Quote Link to comment Share on other sites More sharing options...
Guest Linda Posted September 26, 2005 Report Share Posted September 26, 2005 We used cinder blocks to create a stable wall/dirt support and put the pool up eto the cinder blocks. Good Luck, Linda Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.