Jump to content
Sign in to follow this  
Errol

Help With Polaris Autoclear Plus

Recommended Posts

Every thing was working great with the Polaris. I changed to pool temperature to match the current reading, and now the auto-cycle and sanitizing lights will not come on, and the display is blank. I tried pressing the restart and test buttons simultaneously to reset, and nothing changed. The sanitizing light comes on if I press the 24 hour boost. I completely disconnected the electrical supply to the system and left it for 30 minutes, then hooked it back up. Still no reading on the display, and auto-cycle and sanitizing lights are still off. I tried resetting the water temp, and run times. Display works when setting temp, and run time, but then it goes blank, and auto cycle and sanitizing lights are off.

Any ideas would be appreciated.

Errol

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...