jughead Posted April 13, 2010 Report Share Posted April 13, 2010 cycles threee times then auto gas shutoff blinks . i can hear gas valve click and smell a little gas each time but no burner ignition . i cant remember what the ohm reading on the ignitor is suppose to be i think it is between 50 and 55 but im not positive any one know ? also that glass window that looks like a peep hole for a front door is that a visual for the hot surface ignitor ? if so i seee no glow . also i havnt worked on very many of the lx or lt but plenty of lites so on the lt does the burner tray have to be pulled out to r & r hot surface ignitor ? thanks in advance for advice Quote Link to comment Share on other sites More sharing options...
Pool Clown Posted April 13, 2010 Report Share Posted April 13, 2010 I believe the HSI should be 40 to 75 ohms, unplugged. The peep hole is to see the HSI glowing. Quote Link to comment Share on other sites More sharing options...
jughead Posted April 13, 2010 Author Report Share Posted April 13, 2010 I believe the HSI should be 40 to 75 ohms, unplugged. The peep hole is to see the HSI glowing. thanks i appreciate the help ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.