sewerrat Posted March 5, 2010 Report Share Posted March 5, 2010 I have a 425 gallon tub and generally I'm the only person that uses it I got the tub in early January and by late January the water was cloudy and I assumed I wasn't using enough non-chlorine (I have the Monarch/Nature 2 thingy in my filter) after each soak. So I drained and refilled. Thrilled with my new clean water, I've been soaking every night for 1/2 hour at a time and adding 6-7 teaspoons (fill up the bottom of the cap + a little more) after every soak. Now, the water is starting to get cloudy again (uggg. . . sparkling clean water is so beautiful ) I know I don't have any fancy test kits, but the strips show PH and Alk being in acceptable range. Does too much non-chlorine cause cloudy water? Any ideas to get my water sparkly again without another winter drain/refill? I know, not a lot of facts here, but hoping for some suggestions. Thx Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.