Eric W. Posted November 30, 2009 Report Share Posted November 30, 2009 My wife noticed the "wrist jets" on our 2009 Optima don't seem to do much more than a trickle. Is this the way it was designed? Quote Link to comment Share on other sites More sharing options...
Fetzervalve Posted November 30, 2009 Report Share Posted November 30, 2009 My wife noticed the "wrist jets" on our 2009 Optima don't seem to do much more than a trickle. Is this the way it was designed?We have the same tub but not that condition. Those jets seem produce a pretty decent output, not much compared to the other jets in that seat, but plenty more than a trickle. We get a fairly high frequency pulsation from them, but you must be pretty close to them as the effect dissipates pretty quickly as you move away. Quote Link to comment Share on other sites More sharing options...
Wannago Posted November 30, 2009 Report Share Posted November 30, 2009 We have a 2009 Maxxus...same general comments as Fetzervalve, our little wrist jets provide a pretty good massage, but you have to be pretty close to them. Quote Link to comment Share on other sites More sharing options...
D.P. Roberts Posted December 1, 2009 Report Share Posted December 1, 2009 We have the same tub but not that condition. Those jets seem produce a pretty decent output, not much compared to the other jets in that seat, but plenty more than a trickle. We get a fairly high frequency pulsation from them, but you must be pretty close to them as the effect dissipates pretty quickly as you move away. Fetzervalve - just prepare those jets with some 3 in 1 oil and some gauze pads. And you're gonna need about 10 quarts of antifreeze, preferably Prestone. No, make that Quaker state. Quote Link to comment Share on other sites More sharing options...
Eric W. Posted December 1, 2009 Author Report Share Posted December 1, 2009 Thanks everyone. The service tech is coming out tomorrow to replace a light, and I'll ask him to check it out. Quote Link to comment Share on other sites More sharing options...
tagyerit Posted January 18, 2010 Report Share Posted January 18, 2010 Thanks everyone. The service tech is coming out tomorrow to replace a light, and I'll ask him to check it out. Could you follow up please..Thanks Quote Link to comment Share on other sites More sharing options...
Eric W. Posted January 19, 2010 Author Report Share Posted January 19, 2010 Thanks everyone. The service tech is coming out tomorrow to replace a light, and I'll ask him to check it out. Could you follow up please..Thanks I got called away for my own customer, so I never got to speak to the service tech about the wrist jets. Next time I'm at the showroom, I'm going to check their floor model and see if it differs from mine. Quote Link to comment Share on other sites More sharing options...
Peteyboy Posted January 19, 2010 Report Share Posted January 19, 2010 We have the same tub but not that condition. Those jets seem produce a pretty decent output, not much compared to the other jets in that seat, but plenty more than a trickle. We get a fairly high frequency pulsation from them, but you must be pretty close to them as the effect dissipates pretty quickly as you move away. Fetzervalve - just prepare those jets with some 3 in 1 oil and some gauze pads. And you're gonna need about 10 quarts of antifreeze, preferably Prestone. No, make that Quaker state. And we'll need the head of Alfredo Garcia Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.