sjt2900 Posted July 9, 2009 Report Share Posted July 9, 2009 Because the CH was between 450-500 we drained the tub and refilled with soft water. I added Calcium Chloride until I thought the hardness was right and then tried to work on the other factors. This took a couple of days and everything seemed to be ok. We were in the tub once 2 days ago. Then I check it tonight and get this. FC=2.0 CC=0.5 PH=7.6 AK=50 CH=110 CYA=Less than 30. The tube filled up and never did get cloudy I've never had the AK be low. I always had the problem of it being high before we filled with soft water. And what's up with the CYA? I'm not sure what to think about that. And should the CC be 0.5 after only being in the tub once? Honestly, we were clean when we got in it. Quote Link to comment Share on other sites More sharing options...
Nitro Posted July 10, 2009 Report Share Posted July 10, 2009 Everything is fine. What's the problem? Just use Dichlor a couple more times until CYA hits 30, then switch to bleach. Don't worry about CC as long as it's under 1.0. Your TA/pH are perfect. You might consider raising CH to 150. Enjoy! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.