Search the Community
Showing results for tags 'sx'.
Found 3 results
-
So I have a 2022 SX hot tub. Recently hurricane Ian really devastated the entire area and my hot tub was quite affected. I was able to restore the pump, clean the tub, fix the heater, and last thing is the board itself. I cleaned it super well, used so isopropyl alcohol to clean the dirty bits of it, there is definitely some rusting and stuff but I've definitely seen boards in way worse condition work before. My question ultimately is, is there anyway to troubleshoot the issues with the board? I'm running power to it, jumpers are properly configured, and I get absolutely nothing even showing it's trying to power up. I'm running 120v 20a, the GFCI doesn't trip it just stays on but nothing powers on the board. I have experience with soldering and testing with meters but not much. Is there anyone here with that kind of experience that could help me identify where the issue is originating from? -
Hi We have a two year old hot spring SX (just out of warranty). It has been switched off for a month. I cleaned it (incl filters) , filled it and turned it back on and all seemed fine BUT it won't go about 34 so is too cold to use. The jets are all working just fine. I have noticed that the control panel is a little off though and I don't seem to be able to get into the TLOK menu Have tried switching it off and leaving then switching back on but no difference Anyone got any ideas? I don't think there's an airlock as it is heating AND the jets are running fine. Thanks all
-
My old spa was 355 gallons. I tested weekly and double checked with the local spa store. I always kept the water in perfect balance. It was good for a good 3-4 months, per testing, before i'd have to drain the water. Well, It finally died so replaced it with a smaller Hot Springs SX, 285 gallons. Perfect tub for my wife and I. Love the tub, but after only 1 and a half months, the Total Dissolved Solids and Cyanuric Acid are very high. I don't want to change my water every 2 months! It was only a 70 gallon difference in size. Any ideas how to prolong my water changes? Anyone out there with the SX or similar spa with 285 gallons? If so, how long do you go between water changes?