Search the Community
Showing results for tags 'heating element'.
My spa runs on 110V and is plugged into an exterior weather protected GFCI outlet. I was having no functional issues with my hot tub before I recently drained, cleaned and refilled the hot tub. I started the spa, but after about 3 minutes of running the GFCI outlet tripped. I started trouble shooting by disconnecting components one by one from the main board. First I disconnected the top side control panel, but it still tripped. Second I disconnected the ozone, but it still tripped. Then I disconnected the light, and it seemed to run a bit longer, but it still tripped. As my spa runs on 110V and the heater is disengaged when I put the jets on full, I tested the heater by putting the jets on full. When I put the jets on full the GFCI does not trip. When the high jet cycle ends, the GFCI trips about a minute later. I am guessing now that the issue is with the heater element. Where do I go from here? Thanks.
I was gifted a 4 person ez-spa by Dream Maker, it is a little bit older and has been sitting for a couple of years without running. We cleaned it up really nice and plugged it in for a test drive and it kept tripping the breaker. After watching a few videos on you tube, and by the looks of it, I believe I need a new pump. My question is, does this type of spa require a heating element/sensor or does it require a heating pump? This is what everything looks like. It appears to me that there is not an additional heating element, just the pump, but when I look at the control panel, the circuit for OZONE is missing. So, I am left wondering if this a missing part or if all I need to do is replace the pump and that's what would control the heating of the spa as well. What do I need to buy? I've looked up several pumps but am confused on what would work best for this model of spa. Any advice would help, I am just trying to figure out how to get this spa up and running so I can enjoy it!!
Hey guys I have a wonderful 1990 to Hot Springs Soverign hot tub . I've had no issues with it it runs beautifully and everything about it is immaculate . The only issue is my heating element broke this weekend . I have tried to get replacement parts and cannot Pantley Watkins the company that makes the heating element went out of business last year I have attached the pictures of my heating element if anyone has same hot tub saying heating element please let me know I'm very dire search of it . I have searched every Avenue online and contacted every company online that I know and this part is no longer made and is absolutely obsolete .