Search the Community
Showing results for tags 'h2x'.
Found 3 results
Hello all, looking for help getting my 2006 H2X Master Spa working. I'm new to having a spa tub, but a pretty crafty guy. Here's the situation: Moved the tub from Indy to Louisville, KY. Got it placed and electric hooked up. Filled it and for the first week nothing came on, finally realized I had the breaker terminated wrong. Got it working today,(it's 30 degrees here), and I'm trying to make sure nothing's frozen and/or broken. Looks like all the pipes are ok although I have a little leakage from one of the shut off valves from pump 2 but it seems to be running fine and circulating water through the standup jets. My screen is throwing a DR code, I cycled through 3 times and now it's showing me a DY Code. The manual says the DY code is Inadequate water detected in heater, Pump 1. Pump 2 seems to be cycling water through, Pump 1 doesn't even spin, and when you press the heat button it tries, but then clicks off (I can hear the click in the control unit)I'm wondering if their's air in the line or if there is ice in the line preventing water to flow into the heating element. I'm also wondering if I need to prime pump 1? Do I need to by a new pump? Additional info: Filters were cleaned, I haven't put any chemicals in yet, (should I?) I have pics, but it wont let me upload. Pump 1 is a Balboa 56FR, 4.5HP, 2 speed, 240, 10amp, model DJAYGB-3155MB, I've found one online for $455. I haven't even looked or tried the swimming cycles and pumps yet, anything i need to look out for here? Any help would be awesome, I'd like to get it running and heating asap or I will need to drain it.
I have a 16' H2X swimspa that I bought used and had for 6 months and the propusion motor quit working. It had been working but the propusion was getting weaker. I drained it for new water and found that the blades on the propeller were broken off. How long had they been missing? I don't know. Got the new 3 blade propeller, filled the tub, and fired up the swim spa. TSUNAMI!! After 2 days to heat the water I went to use it and it didn't work. My electrician friend and I checked all the connections we could find. I am getting 36v to the motor so I think the bearings and or motor may be shot. Has anybody rebuilt one of these 36 volt motors? The new one is $900! Any help would be great. Thanks, Clyde