Search the Community
Showing results for tags 'working'.
So i have an in ground spa, it sits in the deck area. I havnt used it for about 6 years, so i went and got a new pump, re-did the PVC and everything worked. But the heating did not. Im using a gas heater and when i turn it on only the pilot turns on, it makes no noise and the main burners dont seem to turn on, i dont actually know how to use the heater properly so maybe im doing somethinf wrong? The flow into the heater is really strong so i know thats not an issue. I put pictures below of the heater if anyone can help me please. P.S. the pump and heater light are on (orange) http:/
So the low speed jets that circulate the water and gets the water hot was working fine. Then I did test using the test trip to check chemical levels and it was high for ph so used spa down and got that to the ideal level also it was low on bromine it was a pink shade so just one less then the first ideal level so I thought I added the correct amount it said 4 teaspoons to every 200 gallon water and i think mine is 1200 gallons and I actually put in less then that maybe for like 600 gallons since it was close to the ideal level. I waited the 30 minutes I did a test again and it was at the high