Search the Community
Showing results for tags 'update'.
-
As the regulars here know I am a Watkin's spa idiot...just don't see many in my area so my knowledge is limited and there are several things going at once on from what I can tell. Have a Caldera spa "Martinique" (S/N: MRA4P5088) with no heat. On the topside I have Power and ready lights flashing in unison. Circ pump is running and moving water. On the circuit board I have a Red LED at D21, Green at power ON and also green LIM OK. All incoming power checks are good. At the top right of the small board there is a darkened area at See Photo 2: The heater tube black box has a drip see photo: Heater has continuity and measured 14.3 ohms. I did not test or jumper the pressure switch...it was 1000 degrees in full sun and was not thinking clearly...lol So where am I going and what am I doing?.. lol Go back and test/jumper pressure switch Replace heater relay board replace heater all of the above or... Recommendations? @RDspaguy @castletonia @cranbiz