Search the Community
Showing results for tags 'saltwater system'.
Found 2 results
Good evening all, After scouring the internet for some information I found this forum. Several weeks of reading through older posts and learning a lot I thought I could post looking for more specific information. I have a 2015 Masterspas Swimspa where one of the pumps went causing the breaker to flip and the water to freeze, the damage was one section of PVC. I’m in the process of repairing and upgrading it and hope to accomplish a reliable swim spa for my family to enjoy that runs on propane and uses salt water instead of chlorine due to a skin sensitivity shared with my wife and kids. I reached out to the manufacturer who said the spa cannot be converted to salt water but wasn’t able to give any specific reasons. I would guess it’s harder on components and would void the warranty? my ultimate goal is to run the spa through a exchanger and connect it to the wood boiler (part of an on going 40x60 barn build, the high efficiency boiler will heat the house and barn). But in the mean time I’d love to convert it to propane (which would be used in the summers as well) . One option I found is the Pentair Master temp, which is still vastly oversized for a 2,000gal tub. Another option, I see one post where someone uses a 75k btu DHW with an exchanger for their spa setup with favorable results. any help would Be greatly appreciated.
We just install Intex AGP 15'x48" and we're using Intex Sandwater Filter SF15110 and Intex Saltwater System CS8110 - 3 day ago We took a water sample to a pool place and the Chlorine Level shows 0.5 according to them the Chlorine level should be 1.2 BUT the Intex Saltwater guide show that Ideal is 0.4 - 1.5 ppm The reading 0.5 has been the same for the last 2 days, we put up the pool 3 days ago.. should I add shock treatment to the pool to jump start the chorine level sine the pool place recommend 1.2 or should I leave it along for now since the current reading is 0.5 and this reading ig "Ideal" according to the Intex guide chart? NOTE: the other reading that is off is the Stabilizer = 0, we haven't added any Cyanuric Acid since the chlorine level is low. Any input will be greatly appreciated.