Search the Community
Showing results for tags 'run'.
-
I'm trying to run down a problem with my motor and was wondering if anyone could help me out. Long story short, I topped off my tub the other night and meant to go back out and turn the hose off after I changed and somehow forgot. When I remembered at 6 am and jumped out of bed to check on it, the water was obviously running over and the panel showed OH on it. I turned it off and let it sit for a while. I emptied some water out and a few hours later turned it back on to see what happened. It comes on and reads the temperature but doesn't start to circulate. I took of the panel and it looks like there was some dampness in there but it wasn't too wet. I feel like the first time I tried it, it clicked a few times but nothing then happened. Now, it doesn't click or anything. Just shows the temperature. If I try to turn the pump on, the light cycles like it does as you go through the speeds, but nothing with the pump. I've had to problem solve some other stuff so I did the normal things....obviously there is power so it's not a main breaker problem. I checked the terminals with an ohm meter and that seems fine. I get a reading on both terminals when tested one by one with the black probe on ground. I checked all the fuses and they get flow across them and look good. Nothing looks as if it shorted...no dark/burn spots that I can see. I even took the capacitor off and check it and got a reading across those terminals. Any ideas?