Search the Community
Showing results for tags 'piping'.
Found 3 results
-
Hi, I have an in-ground pool with a pool system that seems not right to me. Could you please take a look at the 2 attached schematics, the 1st is the actual installation and the 2nd is an idea of how I could fix. Any suggestions on what to do, and how to improve this piping would be great. Also, do you think I should install a check valve, and where should I install it. 1 - Actual installation schema: https://flic.kr/p/GeST5j 2 - Installation idea: https://flic.kr/p/GkK5mm Sorry for the links to Flickr, I could not figure how to attach jpg to this post. Thanks Eric
-
I have a In Ground Pool that after the automatic cleaning system is engaged or regular filter is used sucks all the water out of the out take containment area that goes to the pump until it is sucking air. When this happens the pump is running air at this point and i have to shut the pump off. What I've done so far is: 1. Filled pool above the water line in water containment area that goes to the pump for filtering. 2. Cleaned both the trap filter and the paper filter. 3. Ran it using the auto cleaning system and without using the skimmer. 4. I've filled the pool up several times repeating this and water seems to going somewhere somehow. 5. Uncovered all the pipes up to where they go under the concrete and found no leaks. Please help and if not enough info let me know. David
-
I have a 2003 Del Sol Hermosa and upon opening the cabinet, there is a 1/4 in ID flex hose with a clamp on the end that is dangling on the right side of the cabinet opening. Yesterday, the tub was draining from this hose. The hose seems to go to the top of the tub throught the insulation and if I blow into it, the right side well jet blows air. When I activate the pump, air gets sucked into this tube. The I noticed this tube a while ago but this was the first time water drained from it. Does anyone have a schematic of the hoses for this spa? I can't find any connection for this hose.
