Search the Community
Showing results for tags 'pdc spa'.
-
2001 PDC Spa with PROPAK SSPA-A-P121-P211 controller board troubleshooting. Story: Came home to find my GFIC breaker “kicked”. Hmm…didn’t see anything wrong so, I unplugged the motor (this is a 2001 & it only has one motor for the entire system). Reset the breaker (220V setup). Topside (TSC-18) looked normal with the pressure alarm (3 decimals). So, turned it off, plugged the motor back in, flipped the breaker and Voila! Everything worked for about 5 seconds and POP!!! Looking the provided pictures you will see that the Line#1 on the back of the circuit board popped (circled in Yellow). Also, there appears to be an circuit break within the (red circle) area. This is a PROPAK SSPA-A-P121-P211-O1-LS-H4.0-AMP-PPD controller.
- 11 replies
-
- control board troubleshooting
- sspa-a-p121
-
(and 2 more)
Tagged with:
-
Hello everyone, I have a question and I hope I will get some help. I have a used PDC SPA hot tub , I have got from a family member. it is working fine and it is old with pneumatic push button control. it has two jets the filtration pump which runs continuously all the time is a full size jet pump similar to the second one. the other jet pump run either manually through the push button or through the timer. most probably I will upgrade the control system. here is the question Can I replace the full size jet pump that runs all the time with a tiny small pump that has no noise and save energy like the ones at the new SPA models? or the size of the pipes and the mechanical configuration will not work and must be a full size jet pump like the current one. Thank you appreciate your help and support.
-
- PDC SPA
- filteration pump
-
(and 1 more)
Tagged with: