Search the Community
Showing results for tags 'jetsetter repair'.
Hi! A couple days ago we noticed these three small bits floating in the hot tub. (I attached a bunch of pictures) We did some investigating and it looks as though the light cap just under the moto massage has broken. I think it was a clean break because the top and the threading barrel fits together perfectly (I was thinking about using gorilla glue to repair it?) We’ve been trying to track down the parts (found 2 online that look similar) and find a reliable vendor to replace it. Unfortunately we are just out of warranty and the local spa repairman wants to send a bunch a people out to flip our tub on it’s side and replace it for $300-I’m feeling a bit uncomfortable about that and it seems excessive -considering I was able to access and find the location without all that labor. I think we can replace this ourselves and just order the light cap and screw it in? Any advice and suggestions would be greatly appreciated -thanks so much!
Hello, I have a 2012 Hot Springs Jet Setter Model JJ SN JJ1P2197 that has a safety protection mode on. The water level is okay. The filters are okay. I have removed the stand pipe filter and mineral tablet out of it. It originally had a bad IQ2020 main board. The old part number was a Watkins PN 1315101. I ordered a new control board for it (watkins 76998). The circulation pump kicked on at first flipping the breaker then stopped after a few seconds. The controller panel only works with some functions. No jet pumps or circulation pump. No heater. I took a new plunger to the water return to get any air locks out. There is a red light on the board that has control unplugged beside the light that is red. The lim light is on solid with a green glow. The BUS status light is blinking green about every 5-7 seconds. Any help would be appreciated.