Search the Community
Showing results for tags 'intellichlor'.
-
We have a high pH level and have attempted to adjust the sanitizer output. The output level is stuck at 60% I have attempted to adjust the output by pushing the less button. It will go to 40% but will not go any lower. And then it returns to 60%I have also attempted to make adjustments to the Easytouch control system panel. I followed the instruction booklet and disabled the Intellichlor unit on the panel. However, no change was made, on the slide panel. If I turn off power to the Intellichlor unit at the pentair power box it will also shut off the pool pump. What is your advice?
- 2 replies
-
- intellichlor
- pentair
- (and 5 more)
-
I am enjoying my second season of being a pool owner, but I am still trying to figure things out. Anyway, I have a Pentair IntelliChlor that is hooked up to an EasyTouch control system. My filter is on an automatic timer and is set to go off at 6 pm. Last night around 8 pm, I noticed that the pool filter was still on and the IntelliChlor output had all 5 lights green. At first I thought the system boost was on, but the lights are not flashing, they are solid. I double checked all the settings on the EasyTouch, but they were as they should be (the output was set to 45% for the pool and 2% for the spa). When I changed it on the EasyTouch, nothing happened to the green lights on the IntelliChlor. I checked the chlorine level in the pool and it is extremely high. The only thing I could think to do was to put it in service mode. Any ideas?