Search the Community
Showing results for tags 'generate chlorine'.
Hello, Everyone. This salt / chlorine generation has been a nightmare since buying my home with an inground pool 4 years ago. (Salt, 28k gallon, gunite, 2 skimmers, 1hp super pump, DE hayward pro-grid filter). My issues are around chlorine generation. The salt system is an older Mineral Springs MS-10 Control Panel with software version (r 1.40). I just bought a brand new $900 Hayward salt cell (TCELL 940) a couple hrs ago. I have flow, I have power, I have all chemicals in, water tested, all good -- yet the following issues are present: When I turn Control Panel off, and then switch back up to Auto (on), all green lights are activated and system is generating/working. 5 minutes pass and then I hear a single click noise inside the Panel and then the Green Light next to "Generating Sanitizer" disappears. So I don't believe it's Generating anymore. Secondly, Check Minerals gets lit up Red. Thirdly, inspect cell gets lit up solid Orange (not blinking, and when I hold the selection button down for 3-4 seconds, it doesn't turn off, like I read it should). So not sure what this is all about? Could the older control panel not be compatible with the new salt cell? (Think of hooking together a computer from 2005 with parts from today, 2020; compatibility may be an issue?) Also, what setting do I need to choose on the Control Panel. AL-0, AL-1, AL-2, AL-3, AL-4, AL-5? Perhaps the software version (r 1.40) isn't compatible, either? I don't know. Maybe time to just buy a new Control Panel from the year 2020? I'm sooo tempted to just bulldoze and fill this pool in, and plant some pepper & squash plants! If anyone can lend a minute of assistance, it would be SOOO APPRECIATED! Your Fellow American, David
My chlorine generating system does not appear to be working properly. A few weeks ago I cleaned the cell and it is still not making chlorine. The salt reading is at 3.4 and the system is not giving me any error codes, the light goes on saying it is making chlorine but after a couple days I use my test strips and nothing. Any idea on what to do next, aside from buying a new sensor and or cell?