Search the Community
Showing results for tags 'electronic'.
Found 3 results
-
Heyhey, maybe someone can help me I bought a used sundance sentry 850 here in germany. Today i tried to to check the electronic, but nothing worked. Sometimes if i turn the power on the Display shows 0000 and you can hear the blower working slowly, sometimes the Display shows - - - - and you cant hear anything. I added three pictures. Is the jumper setting correct? What do the jumper settings mean, I have no plan for the jumper. Maybe someone has an idea Thank you
-
Hi again all, I have a Hot Springs Hot Spot SX that isn't heating. I'm able to set the target temp and the spa will attempt to run and heat up but after a while I get the following error code while the jets are running - display reads ===== with 'ready' slowly blinking, with filter cycle icon in lower right lit and jet icon in lower left lit. I already replaced the electronic pressure switch thinking this would solve the problem, but it's doing the same thing. Any guidance is much appreciated!
-
Hi all, I have a Hot Springs Hot Spot SX that isn't heating. I'm able to set the target temp and the spa will attempt to run and heat up but after a while I get the following error code while the jets are running - display reads ===== with 'ready' slowly blinking, with filter cycle icon in lower right lit and jet icon in lower left lit. I feel like I may need to replace the electronic pressure switch because it dripped slowly for a couple minutes when I first turned it on. Any guidance is much appreciated!
