Search the Community
Showing results for tags 'diag'.
Found 2 results
-
I Have a vita L700C whenever I try to use the topside panel it always blinks no matter what setting I am in and it wont heat up. The clock will blink, when I change the setting to see the water temperature it continues to blink, when I change it to the set temp of 102 degrees it continues to blink. I have replaced the recirculator pump and the heater element. I am going to put in a new topside panel due to it being hard to read due to the condensation that has built up over the years. All 3 pumps work as they should. I tested the new heater element and the Ohms were within spec. When i turn the breaker on and test the heater for voltage it only reads at 0.023V. The heater element is a 4kW @ 240v system. Any ideas or help to guide me in the right direction would be greatly appreciated.
-
I have a Balboa EL2001 Mach 2 circuit board and ML700 topside panel with aux top panel. I am trying to pinpoint if I have an issue with the topside panel or the circuit board. The board was replaces under 2 years ago. The top panel acts like everything works, icons change like it is working, but nothing actually turns on. None of the 3 motors and not even the spa water light. All the fuses are good and I don't see any visible damage on the board. I would love to be able to unplug both top panels and test if I can get the circuit board to turn anything on. Is that possible?