Hi all, im new to the forum. I recently purchased a Vita Spa Vintage hot tub with a heat problem. I believe the element is bad but not to sure. After removing it I did an ohms reading and got .17 ohms. I checked Spa Depots website before I found this forum and they said most elements range from 9-12 ohms if they are good, and some can go up to 25 ohms. So far the high limit and thermostat tested good so im leaning towards the element. Its a 240v and from what the element cover says is 6000 watts. Any help would greatly be appreciated! Also is there any way to test the thermocouple? From what I can see i has 1 wire going directly to the high limit.